Keep the Colour of the Stone as Close to Natural as Possible. Surface Sheen (easier maintenance)
Keep the Colour of the Stone as Close to Natural as Possible. Surface Sheen (easier maintenance)
Lay the stone but do not grout it. Ensure that the stone is clean. Use Lithofin Power Clean if the stone needs cleaning.
Make sure the stone is dry. Apply a coat of Lithofin MN Stain Stop, follow the instructions on this site and the can
After 20 hours, grout the floor. Take care to remove all grout residue. Use Builders Clean to remove cement or grout residues if required.
When the floor is clean and dry again apply MN Stain Stop, follow the instructions on this site and on the can.
After at least 2 days apply 2 - 4 coats of Lithofin Multi Seal, follow the instructions on this site and on the can. Do not use in bathrooms / wet areas / outside.
Maintain with Easy Care.
See "Maintain a Stone Floor" at the start of the Questions and Answers system for detailed maintenance information.
- Order within
- for delivery on Mon 21/May/2012
-
On orders
over £50 - + FREE DELIVERY