Enhance the Natural Colours.

Lay the stone but do not grout it. Ensure that the stone is clean. Use Lithofin Power Clean if the stone needs cleaning. Do not use any acidic cement or grout removing products.

Make sure the stone is dry. Apply a coat of Lithofin Stain Stop Plus, follow the instructions on this site and the can

After 20 hours, grout the floor. Take care to remove all grout residue.

When the floor is clean and dry again apply Stain Stop Plus, follow the instructions on this site and on the can.

If Honed you can apply 2 - 4 coats of Multiseal for a surface sheen and easier maintenance. If Tumbled you can apply 2 - 4 coats of Multi Seal OR Cobble Wax for a surface sheen / antique finish. Do not use in bathrooms / wet areas / outside.

Maintain with Easy Care.

See "Maintain a Stone Floor" at the start of the Questions and Answers system for detailed maintenance information.

MN Power-Clean - 1L

Removes ground in dirt from limestone surfaces. Can be used to assist with the removal of grout residue from limestone.

Our Price: £9.77 (Quantity in Stock: 39)
MN Stain Stop Plus - 1L

MN Stainstop plus Colour Intensifier makes surfaces oil and water repellent and intensifies colour structure.

Our Price: £28.84 (Quantity in Stock: 87)
Multi Seal - 1L

Surface sealer renders rough limestone, sandstone and terracotta resistant to staining, water and dirt. Gives a low sheen and makes the surface smoother and, therefore, easier to clean.

Our Price: £19.14 (Quantity in Stock: 58)
Lithofin MN Cobble Wax

This ready-to-use wax system forms a hard-wearing film, giving an enhanced, silky appearance. The surface will become less sensitive and maintenance becomes easier.

Our Price: £14.68 (Quantity in Stock: 17)
Easy Care - 1L

Daily or weekly routine maintenance. The product will not damage sealers and is suitable for any natural or artificial stone, ceramics or terracotta.

Our Price: £9.34 (Quantity in Stock: 61)