Enhance the Natural Colours. Surface Sheen (easier maintenance)
Enhance the Natural Colours. Surface Sheen (easier maintenance)
Lay the stone but do not grout it. Ensure that the stone is clean. Use Lithofin Power Clean if the stone needs cleaning.
Use Builders Clean to remove cement or grout residues if required.
Make sure the stone is dry. Apply a coat of Lithofin Stain Stop Plus, follow the instructions on this site and the can
After 20 hours, grout the floor. Take care to remove all grout residue. Use Builders Clean to remove cement or grout residues if required.
When the floor is clean and dry again apply Stain Stop Plus, follow the instructions on this site and on the can.
After at least 2 days apply 2 - 4 coats of Lithofin Multi Seal, follow the instructions on this site and on the can. Do not use in bathrooms / wet areas / outside.
Maintain with Easy Care.
See "Maintain a Stone Floor" at the start of the Questions and Answers system for detailed maintenance information.
- Order within
- for delivery on Mon 21/May/2012
-
On orders
over £50 - + FREE DELIVERY