How to Seal a New, Internal, Polished Granite Floor

Lay the stone but do not grout it. Ensure that the stone is clean. Use Lithofin Power Clean if the stone needs cleaning.

Use Builders Clean to remove cement and grout residues but TEST THE STONE FIRST with this product. If in doubt, call us.

Make sure the stone is dry. Apply a coat of Lithofin MN Stain Stop, follow the instructions on this site and the can

After 20 hours, grout the floor. Take care to remove all grout residue.

When the floor is clean and dry again apply MN Stain Stop, follow the instructions on this site and on the can.

Maintain with Easy Care.

See "Maintain a Stone Floor" at the start of the Questions and Answers system for detailed maintenance information.

MN Power-Clean - 1L

Removes ground in dirt from limestone surfaces. Can be used to assist with the removal of grout residue from limestone.

Our Price: £9.77 (Quantity in Stock: 40)
MN Builders-Clean

Supplied in 1 litre containers. Removes cement dust and residue, grout residue, plaster residue and general dirt. Useful for a final clean after installation and prior to sealing. Removes rust stains or oxidation marks from granite. Safe on any acid

Our Price: £8.71 (Quantity in Stock: 57)
MN Stainstop - 1L

Renders porous natural stone resistant to water, oil, grease, dirt and staining. The product does not change the colour or appearance of the stone. It is suitable for use on limestone, marble and most porous natural stone.

Our Price: £25.97 (Quantity in Stock: 83)
Easy Care - 1L

Daily or weekly routine maintenance. The product will not damage sealers and is suitable for any natural or artificial stone, ceramics or terracotta.

Our Price: £9.34 (Quantity in Stock: 84)