Enhance the Natural Colours. Surface Sheen (easier maintenance)

Lay the stone but do not grout it. Ensure that the stone is clean. Use Lithofin Power Clean if the stone needs cleaning.

Make sure the stone is dry. Apply a coat of Stain Stop Plus, follow the instructions on this site and the can.

After 20 hours, grout the floor. Take care to remove all grout residue. Use Builders Clean to remove cement or grout residues if required.

When the floor is clean and dry again apply Stain Stop Plus, follow instructions on this site and on the can.

After at least 2 days apply 2 - 4 coats of Lithofin Multi Seal, follow the instructions on this site and on the can. Do not use in bathrooms / wet areas / outside.

Maintain with Easy Care.

See "Maintain a Stone Floor" at the start of the Questions and Answers system for detailed maintenance information.

MN Power-Clean - 1L

Removes ground in dirt from limestone surfaces. Can be used to assist with the removal of grout residue from limestone.

Our Price: £9.77 (Quantity in Stock: 47)
MN Builders-Clean

Supplied in 1 litre containers. Removes cement dust and residue, grout residue, plaster residue and general dirt. Useful for a final clean after installation and prior to sealing. Removes rust stains or oxidation marks from granite. Safe on any acid

Our Price: £8.71 (Quantity in Stock: 82)
MN Stain Stop Plus - 1L

MN Stainstop plus Colour Intensifier makes surfaces oil and water repellent and intensifies colour structure.

Our Price: £28.84 (Quantity in Stock: 65)
Multi Seal - 1L

Surface sealer renders rough limestone, sandstone and terracotta resistant to staining, water and dirt. Gives a low sheen and makes the surface smoother and, therefore, easier to clean.

Our Price: £19.14 (Quantity in Stock: 68)
Easy Care - 1L

Daily or weekly routine maintenance. The product will not damage sealers and is suitable for any natural or artificial stone, ceramics or terracotta.

Our Price: £9.34 (Quantity in Stock: 127)