Seal an Internal Limestone Floor Without Providing a Sheen or Shine
Always follow instructions on the product labels, technical information and videos.
Always test products on a small area first.
Please Contact Us if you have any queries.
You will be using an "Impregnating Sealer" which means a product that soaks into the face of the stone and does not leave any surface residue or coating. These products do not leave any sheen or shine.
To Leave The Colour Of The Stone Unchanged
For Textured and / or the More Porous types of Limestone we would choose the water based product, Hidro TW. Follow the instructions and do a test area first.
For Smooth, Honed or Polished and Less Porous Limestone we would choose the solvent based product Twins TW. Follow the instructions on the Product Page and do a test area first.
To Enhance The Colour Of The Stone
To Enhance The Colour Of Limestone you can use AVO. The colour you achieve will approximately half way between the "wet" and "dry" colour of any given stone. There will be no sheen or shine (above the level on the stone naturally).
When using AVO it is vital that you do a small test area first. It is practically impossible to remove this product.
We advise testing on a spare stone initially then doing small areas on the floor. Only scale up the work when you are completely satisfied with the results. Follow all instructions and call us if you need guidance.
Don’t want to Do-It-Yourself? We can do the work for you or put you in touch with a contractor